AIRcable OS : SERIAL OS
The AIRcable Serial OS is designed for optimizing serial-to-Bluetooth connections. It is much more than just a connection module.
Using a 1 inch stubby externa antenna the range can be extended to 40m (100ft). Our 2dBi antenna measured a range of over 150m (500ft). You receive both antennas, while supply lasts. See our full range of external anntennas.
The AIRcable Serial OS is programmed in BASIC and available for you (the customer) to adapt it to your particular application and needs.
The already installed BASIC application allows zero-configuration use as "service-slave", allowing incoming serial connections from other Bluetooth devices. With the push of a button it configures in a secure one-to-one slave or master mode.
The AIRcable Serial OS runs the latest "AIRcable OS Operating System" that allows complete customization including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. see programming manual.
The AIRcable Serial OS has a male type DB9 connector which can be adapted to a female type connector with our null-modem adapter.
The AIRcable Serial OS has external baud rate switches for 4800 - 115200 baud and a hardware handshake disable switch so it can be used in 3 wire serial connection applications.
Powering the AIRcable Serial OS is possible from the external power plug (1.3mm) or through pin 9 with an extended range of 4.5-15V.
Every AIRcable-Serial OS is now shipped with a free null-modem adapter that supports power through pin 9 and with a highly efficient international voltage charger for the battery.