CABLE REPLACEMENT :
AIRcable Serial3 to Serial3X
Connect standard serial devices without using cables and with even more range and installation options!
AIRcable Serial3-to-Serial3X provides a fast, convenient way of connecting any computer equipped with a serial port to other serial (RS-232) based devices such as laboratory equipment, point-of-sale devices, scanners and printers, without using any cables.
The Serial3X's external antenna adds range and increases installation flexibility. The Serial3X's onboard battery allows it to operate without power from the serial port or an external power supply.
Intelligent and Programmable NEW!
The Serial3 and Serial3X are now intelligent and programmable via the onboard AIRcable OS.
Learn more about the modules:
Serial3 product page
The AIRcable Serial3-to-Serial3X package comes with a Serial-Male module, a Serial3X module, and two null-modem adapters.
The Serial3-to-Serial3X package allows the following configurations:
The Serial Wireless Cable modules conform to the industrial standard EIA-232-E for serial data communication and act as transparent pass-through devices, such as an RS-232 cable without the wires. It provides complete emulation of all RS-232 signals.
The AIRcable Serial3 does not require any software to establish a Bluetooth connection. There is also no need to change any software on the connected devices. The AIRcable serial is a true "cable replacement" product. The serial data rate (between 4800 bps and 115200 bps) is adjusted by a simple external switch.
Data rate can be different on both modules, providing a baud rate conversion.
Both AIRcable Serial modules can be powered through the serial connector or with the optional power supply from the external power plug. They have a wide range of input voltage, accepting 5 to15 volts.
Every AIRcable Serial3 module is now shipped with a free null-modem adapter that is used to convert the male serial plug to a female serial plug and supports power through pin 9.
OEM modules are available without plastic cover or without the DB9 connector for TTL level serial signals as a custom order only.